Skip to content
Spend $100 Ship For Free! $10.25 Shipping For Orders Under $100
Spend $100 Ship For Free! $10.25 Shipping For Orders Under $100
How To Install Cabinet Door Hinges?

How To Install Cabinet Door Hinges?

When mounting cabinet doors, it is critical to put in cabinet hinges as it should be to make certain that they are properly aligned and open smoothly. However, with the right equipment and precise dimensions, you may without difficulty install your very own cupboard hinges. Begin by choosing the type of hinge you want to install. A concealed hinge is hidden from view, but it calls for you to make a hollow in the cabinet door. A conventional hinge will be seen, but it's miles less complicated to install and can provide a decorative touch to your cabinet. 

Learn more about The Best Door Hinges - Click Here

What Are Cabinet Door Hinges And What Do They Do?

Cabinet door hinges are mechanical bearings that enable cabinet doors to open and close smoothly with the aid of spinning. The hinge's pivot point, or hinge pin, allows the door to open and near. The frame wing of the hinge is visible at the inside of the cabinet, whilst the door wing is hidden whilst the door is closed. This layout conceals the hinge's basic function, ensuing in a streamlined look even as making sure robust cabinet door functioning.

What Are The Different Types Of Cabinet Door Hinges?

Here are a few varieties of cabinet door hinges:

Demountable hinges

These hinges do not require screws and slide into slots on the door and frame, making them perfect for kitchen cabinets with easily removable doors for cleaning.

Concealed hinges

These hinges, additionally called European hinges, are hidden from view whilst a cupboard door is closed and are generally used in kitchen and workplace cabinets. They make it clean to regulate the door to account for minor flaws in cabinet creation.

Full overlay hinges

These hinges, which can be interior or exterior, are attached to doors with the closed end completely covering the cabinet frame.

Half overlay hinges

These hinges can be observed at the internal or out of doors of the cabinet, and when closed, the door completely covers the frame.

Surface mount hinges

Also known as frameless or side hinges, these hinges are simple to install and are frequently used for cosmetic purposes.

Butt hinges

These are the most popular types of door hinges, with two leaves mortised to the frame and door, "butting" up against each other when closed.

Inset cabinet hinges

These hinges are available in two styles: visible barrel and concealed. When the doors are closed, exposed barrel hinges are visible, whereas concealed hinges are hidden.

Offset hinges

These hinges allow a door to swing out extra than immediately hinges, making them suitable for cabinets with inset doors. 

How To Install Cabinet Door Hinges?

Here are the steps to install cabinet door hinges:

  • Unscrew and do away with the screws holding the vintage hinges in location.
  • When replacing old hinges, mark them so that you don't reuse them. When putting in hinges on new doorways, use a mixture square to mark wherein to drill the holes.
  • Use a forstner bit to create a "cup hollow" at the returned side of every door. If your new doors are pre-drilled, install the new hinge at the rear and drill pilot holes for the screws with a drill bit smaller than the hinge screw.
  • Attach the hinge's mounting plates to the cabinet door's body. Make certain the screws are securely fixed.
  • Clip the hinges to the lower back panels. Screw the hinges halfway in, making sure the doors are the proper height. Next, tighten the screws at the lower back plate.
  • Use the provided screws to attach the cupboard door or drawer to the mounting plates. Screw the screws tightly. 

Fixes For The Common problems with cabinet hinges

Cabinet hinges are workhorses, but like whatever else, they can experience troubles over time. Here are a few common cupboard hinge troubles and a way to fix them:

Loose Hinges

This is the maximum commonplace trouble. The telltale signal is a door that swings inconsistently or would not live close nicely.

Fix: Grab a screwdriver and tighten the screws at the hinge attached to each cupboard and the door. Tighten them gradually, checking the door alignment after each turn.

Misaligned Doors

This can occur because of free screws, wrong hinge installation, or warping of the door or cupboard itself.


  • For loose screws, follow the steps above.
  • If the hinge seems misaligned, you might need to adjust the mounting screws on the cabinet side. 
  • Loosen them slightly and nudge the hinge until the door aligns properly. Re-tighten the screws. In severe cases of warping, the door or cabinet frame might need repairs or replacement.

Sticking Doors

This can be caused by a buildup of dirt and grime, a warped door, or the hinge rubbing against the cabinet.


  • Clean the hinge and surrounding area with a humid cloth.
  • If the door is warped, upkeep might be essential.
  • Check if the hinge is rubbing against the cabinet. You might need to adjust the mounting screws slightly to create more clearance.

Broken Hinges

In some cases, the hinge itself is probably broken beyond restore.

Fix: Replace the damaged hinge with a new one of the identical length and kind.

Summing up!

Cabinet hinges are essential components of any cabinet because they make certain that the cupboard door or drawer is securely mounted to the body. In addition, cabinet hinges can provide your cabinets a more polished and professional look. Cabinet hinges additionally make it clean to open and close doors and drawers without exerting extra force.

Now that you understand the blessings of cupboard hinges and how to effectively set up them, you need to be prepared to address your subsequent activity. Good luck! Installing cabinet hinges is an easy approach that takes just a few minutes. With the proper equipment and supplies, anyone can properly install it.


Buy Cabinet Hinges
Previous article How to replace door hinges?
Next article Buyer's Guide To Door Hinges - What To Buy And How To Install?

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare