Skip to content
Spend $100 Ship For Free! $10.25 Shipping For Orders Under $100
Spend $100 Ship For Free! $10.25 Shipping For Orders Under $100
How to Adjust A Norton Door Closer

How to Adjust a Norton Door Closer: A Step-by-Step Guide

Norton Door Closer

Are you struggling with a door that slams shut or doesn't close properly? Adjusting your Norton door closer can help you solve this problem. A Norton door closer is a hydraulic device that controls the closing speed and force of a door. In this article, we will guide you through the process of adjusting a Norton door closer to ensure smooth and controlled door closing. Let's dive in!

How to Adjust A Norton Door Closer: A Step-by-Step Guide

Adjusting a Norton door closer is a straightforward process that can improve the functionality and performance of your door. By making a few simple adjustments, you can prevent the door from slamming shut, ensure it closes smoothly, and improve overall door operation.

Understanding Norton Door Closers

Norton door closers are widely used in commercial and residential buildings. They consist of hydraulic parts that control the door's closing speed, latching speed, and backcheck.Discover more about door closers types. These closers are designed to provide controlled closing and offer adjustable features to suit different door types and environments.

Tools Required

Before you begin adjusting your Norton door closer, gather the following tools:

  • Screwdriver (flathead or Phillips, depending on the screws)
  • Allen wrench (if applicable)
  • Measuring tape
Norton Door Closer

Step 1: Identify the Adjusting Screws

Locate the adjusting screws on your Norton door closer. These screws are usually labeled and can be found on the closer body or arm. The most common screws to look for are the closing speed screw, latching speed screw, and backcheck screw.

Step 2: Adjusting the Closing Speed

Turn the closing speed lever clockwise to increase the speed and counterclockwise to lower the speed. Make minimal changes and test the door after each one to confirm that the desired speed is obtained. It is critical to strike the proper balance so that the door does not close too rapidly or too slowly.

Step 3: Adjusting the Latching Speed

The latching speed controls how quickly the door closes in the last minutes before closing. Locate the closing speed screw and spin it clockwise to raise the speed or counterclockwise to lower the speed. Again, make slow modifications and test the door until the required latching speed is achieved.

Step 4: Adjusting the Backcheck

The backcheck feature prevents the door from opening too forcefully and damaging the surrounding walls or hardware. To adjust the backcheck, locate the backcheck screw and turn it clockwise to increase the resistance or counterclockwise to decrease it. Test the door to ensure it provides the desired backcheck effect.

Step 5: Testing and Fine-Tuning

After adjusting each component, test the door to evaluate its performance. Check for smooth closing, appropriate speed, and proper latching. If necessary, make further adjustments to achieve optimal results. Take your time during this process and be patient to achieve the desired door functionality.

Troubleshooting Common Issues

Sometimes, despite adjusting the Norton door closer, certain issues may persist. Here are some troubleshooting tips for common problems:

  • If the door slams shut suddenly, adjust the closing speed screw to slow down the closing action.
  • If the door doesn't close fully, adjust the latching speed screw to ensure a complete latch.
  • If you face other issues or difficulties, consult the norton door closer manual or contact a professional for assistance.
Door Closer

About Trillium Now

Trillium Now is a part of Trillium Facility Solutions based out of our national support center in Michigan.Trillium Now is a premier hardware store that prides itself on providing top-notch products and exceptional services to customers. Our store is well-stocked with a wide range of high-quality hardware items, making us a one-stop destination for all your home improvement needs. Whether you're a DIY enthusiast or a professional contractor, we have everything you require to complete your projects successfully. From power tools and plumbing supplies , our extensive product selection caters to diverse requirements. Our knowledgeable and friendly staff members are always ready to assist you in finding the right products and offer expert advice. At Trillium Now, we prioritize customer satisfaction and strive to deliver exceptional service, ensuring that your experience with us is enjoyable and productive.

Conclusion

Adjusting a Norton door closer can significantly improve the functionality and performance of your door. By following the step-by-step guide outlined in this article, you can ensure smooth and controlled door closing. Remember to make small adjustments, test the door after each change, and troubleshoot any persisting issues. With a properly adjusted Norton door closer, you can enjoy the benefits of a well-functioning door.

FAQs

Q: How often should I adjust my Norton door closer?

The frequency of norton door closer adjustment depends on various factors such as door usage, environmental conditions, and overall door maintenance. It is recommended to check and adjust the door closer periodically to maintain optimal performance.

Q : Can I adjust the door closer on my own, or do I need professional help?

Adjusting a Norton door closer can be done by following the manufacturer's norton door closer adjustment instructions and guidelines. However, if you are unsure or face difficulties, it is advisable to seek professional assistance to ensure proper norton door closer adjustment and prevent any damage to the door closer.

Q: My door slams shut abruptly. How can I fix this?

If the door slams shut abruptly, you can adjust the closing speed screw to slow down the door's closing action. By making incremental norton door closer adjustment and testing the door after each change, you can find the right balance and prevent the door from slamming shut.

Q: The door doesn't close fully. What should I do?

If the door doesn't close fully, adjust the latching speed screw to ensure a complete latch. By turning the latching speed screw clockwise or counterclockwise in small increments, you can achieve proper door closure.

Q: Are Norton door closers suitable for all types of doors?

Norton door closers are designed to be adjustable and suitable for a broad range of doors, including commercial and residential applications. Nonetheless, for maximum performance, it is critical to pick the suitable model and size based on your individual door needs.

Previous article Mortise Locks vs. Cylindrical Locks – What's the Difference?

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare